Kenwood Th-d74 Software

TH-D74A/E
Frequency Control Program
ARFC-D74 Version 1.01
Last updated : December 21, 2016

If you’re looking for a cheaper way to program your Kenwood TH-D74A, then the RT Systems KRS-D74 would be right up your alley. It’s another programming software that would make programming much easier for beginners than if they were to do it using the free Kenwood software. Sep 18, 2016 Memory Control Program TH-D74A/E Kenwood. This software is to create, edit, and administer the data for the memory channels and menus on your PC connected to TH-D74. This software and TH-D74 transceiver can be connected using a USB 2.0 cable or the Bluetooth function. The operable transceiver and the recommended system requirements for using.

Welcome

Thank you for choosing the KENWOOD TH-D74A/E transceiver. By utilizing this software, you can enjoy more comfortable and more sophisticated communications with the TH-D74A/E transceiver.

Kenwood KSC-25LS Rapid Charger For TH-D74A - Main Trading Company


Kenwood Th-d74 Software

About this software

ARFC-D74 is a software, with a connection between the TH-D74A/E transceiver and your PC, allowing you to control from your PC the receive frequency for operation in IF/Detect Output Mode by the transceiver.

Kenwood Th-d74 Software

This software and TH-D74A/E transceiver can be connected using a Micro-USB cable or the Bluetooth function.


About virtual COM port driver for the TH-D74

A virtual COM port driver needs to be installed onto the PC to use the ARFC-D74
ATTENTION:Do not connect the transceiver to a PC before installing the virtual COM port driver.


Operating Environments

1. Operating System (OS)

Windows® 7 (SP1 or later) (32-bit or 64-bit)
Windows® 8.1 (RTM or later) (32-bit or 64-bit)
Windows® 10 (Version 1511 (OS Build 10586.0) or later) (32-bit or 64-bit)

Notes:

This software is designed to run on the above operating systems.

Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications.

The .NET Framework 4.6 which is available for download from Microsoft download center must also be installed. (Windows® 10 users do not need to install the .NET Framework.).

2. Processor Delphi car diagnostic software download, free.

Faster than the recommended CPU for each OS.

3. System Memory (RAM)

Larger than the recommended System Memory for each OS.

4. Free Hard Drive Space

100 MB or more of free hard drive space.

5. Peripheral Devices

A display with resolutions higher than SXGA (1280 x 1024).

A keyboard and a mouse, or other pointing devices.

USB 2.0 port or Bluetooth function that conforms to SPP (Serial Port Profile).


Attention

With this software, you cannot directly increment or decrement the receive frequency for reception by the TH-D74A/E transceiver while the transceiver is operative in AF Output Mode.

Since the software is for operation in IF/Detect Output Mode, the TH-D74A/E's Squelch is always opened while the software is connected to the TH-D74A/E.

Turn the transceiver OFF before connecting it to a PC.

TH-D74A/E Memory Control Program MCP-D74 Version 1.00

You cannot connect the TH-D74A/E to a PC COM port via an RS-232C cable.


Notes on usage

Kenwood th-d74 software

Users are prohibited to assign, rent, lease, redistribute, or resell the software.

Users are prohibited to revise, change, translate, merge, de-compile, or reverse engineer the software.

JVC KENWOOD Corporation does not warrant that quality and functions of this software comply with each user's purpose of use of this software, and unless specifically described in this document, JVC KENWOOD Corporation shall be free from any responsibilities to any defects and indemnities to any damages or losses. Selection and installation of this software shall be done by the user's own designation. The user shall take full responsibility for the use and effects of this software.

JVC KENWOOD Corporation shall be free from any responsibilities for any incidental losses or damages, such as missing communications or a call opportunity, caused by a failure or performance error of this software.

JVC KENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software. The user shall be allowed to use, not to resell, the software by obtaining a license from JVC KENWOOD Corporation. While the media on which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVC KENWOOD Corporation.


Installing the ARFC-D74

Extract the downloaded file 'ARFC-D74_V101.zip' into a designated folder.
In the designated folder, a folder labeled 'ARFC-D74_V101' will be created.
Execute the 'setup.exe' in the folder labeled 'ARFC-D74_V101', and follow the instructions that appear on the display to install ARFC-D74.

Note:

Administrator privileges are required when installing the ARFC-D74.


Uninstalling the ARFC-D74

Select 'ARFC-D74' in 'Uninstall a program' in the Control Panel and follow the instructions that appear on the display to uninstall the software. Or double-click 'setup.exe', and follow the instructions that appear on the display to uninstall the software.

Kenwood Th-d74 Software

Notes:

Administrative privileges are required to uninstall the ARFC-D74.

Always exit the ARFC-D74 before uninstalling the software.


Update History

Kenwood Th D74 Software Download

Ver.1.01 (December 21, 2016)

Improves stability of the Bluetooth connection.


Ver.1.00 (September 16, 2016)

First Release


If you agree with the details listed above, click the following link to download the ARFC-D74 software.

Download ARFC-D74 Version 1.01 (filename: ARFC-D74_V101.zip; file size : 22.1MB)
(The latest version includes all previous updates.)

Windows is a registered trademark or trademark of Microsoft Corporation in the United States and other countries.

.NET Framework is a registered trademark or trademark of Microsoft Corporation in the United States and other countries.